Setting Return To Standby Mode; Sleep Mode; Powersave Mode - Sanyo Katana Eclipse X User Manual

Setting Return to Standby Mode

This feature allows you to select the way to return to
standby mode.
1.
Select and press
.
Return to Idle
2.
A message appears. Press
continue.
3.
Select
Automatically
to return to standby mode
Automatically
automatically when no key is pressed for 30
seconds.
to return to standby mode by pressing
End Key
Note The End Key setting affects the battery's talk and
standby times.

PowerSave Mode

This feature helps conserve your battery power by
setting:
Main Screen and Outer Screen backlight to
.
Dim Only
Key backlight to
50 Section 2C. Settings
> Settings > Display >
(left softkey) to
OK
or .
End Key
.
Always Off
Main Screen sleep mode to
Outer Screen sleep mode to
1.
Select and press
.
Pwr Save Mode
2.
A message appears. Press
continue.
3.
Select On . (Select

Sleep Mode

This feature helps conserve your battery power by
restricting the display.
1.
Select and press
.
2.
Select Main Screen
3.
Select
Sleep Mode
4.
Select a time interval before the phone goes into
sleep mode and press
this feature.)
After 30 Sec.
After 5 Sec.
> Settings > Display >
OK (left softkey) to
Off to deactivate this feature.)
> Settings > Display
or Outer Screen .
.
. (Select Off to deactivate
.