Making A Voice Call Using Asr - Sanyo Katana Eclipse X User Manual

Note Use ASR in a quiet environment so it can accurately
recognize your commands.
Tip When you display a Command menu, say
" More options " to display additional commands.
During ASR operation, press Help (left softkey) to
get instructions using the software.

Making a Voice Call Using ASR

With ASR, you can make a voice call by reciting a name
or phone number.
1.
Press and hold or
2.
If you hear "Say a command," say "
3. If you hear "Say the name or number," say a name
or a phone number.
4.
If you hear "Which location?," say a number type
(for example, "Mobile").
Tip You can skip steps 3 and 4 by saying a name and
location after "Call"without pausing (for example,
"Call John Jones mobile").
.
."
Call
Note If ASR does not recognize the name or number, it
will find the most likely matches and display a list of
up to three names or numbers. You will hear "Did
you say..." followed by the name or number. You
can confirm by saying "Yes." Say "No" to change the
selection.
Opening Menus Using ASR
You can jump directly to many menu items or
applications by saying "Go to" followed by a menu
option.
1.
Press and hold or
2. If you hear "Say a command," say "
3.
If you hear "Which shortcut?," say an application
name (for example, "Messages").
4. The menu you have chosen will open.
Tip Say " More options " to display additional
commands.
Section 2I. Voice Services
.
."
Go To
95