Using The Microsd Adapter - Sanyo Katana Eclipse X User Manual

Using the microSD Adapter

The supplied microSD adapter allows microSD cards to
be used in SD-compatible devices. Before using, you
will need to insert the microSD card into the microSD
adapter.
To insert the microSD card into the microSD adapter:
With the label side of the microSD card facing up,
insert the card into the supplied microSD adapter,
and gently slide the card until it is fully inserted.
To remove the microSD card from the microSD adapter:
Hold the front edge of the microSD card, and gently
pull outward to remove it from the adapter.
104 Section 2J. microSD Card
Setting Write Protection
The included microSD adapter has built-in write
protection to prevent accidental overwriting or erasure of
your vital data.
Slide the write-protect tab down to the "Lock"
position to prevent overwriting data. To enable
writing or reading data on the microSD card, slide
the write-protect tab back up to the normal position.
Write-Protect
Tab
LOCK