Microsd Icon Indicators; Inserting The Microsd Card - Sanyo Katana Eclipse X User Manual

Note The microSD card and its adapter can be easily
damaged by improper operation. Please be careful
when inserting, removing, or handling them.

Inserting the microSD Card

1.
Open the microSD slot cover and insert a microSD
card into the slot with the gold terminals facing up
(see illustration below).
2.
Gently press the card until it snaps into place.
3.
Close the slot cover.
gold terminals
facing up
Note Be sure to use only recommended microSD cards
(64MB-8GB). Using non-recommended microSD
cards could cause data loss and damage your
phone.

microSD Icon Indicators

The following icon will be displayed on your phone's
display screen when a microSD card is properly
inserted into the microSD card slot:
Status Icon Meaning
This icon indicates a microSD
card has been inserted into your
phone. It turns dim while the
microSD card is being accessed.
Note DO NOT remove a microSD card while files are
being accessed or transferred. Doing so will result
in loss or damage of data.
Make sure your battery is fully charged before using
the microSD card. Your data may become
damaged or unusable if the battery runs out while
using the microSD card.
Section 2J. microSD Card 103