Sanyo Katana Eclipse X User Manual page 142

Note You may not be able to print pictures that you
cannot display on your phone.
: You can select the print mode from
Layout
,
Default Printer Standard Print
. (If you have selected
DPOF Print
Yes [left softkey] to print. To set up the DPOF Print,
see "Setting Up the Digital Print Order Format" on
page 109.)
: You can set the number of copies
Num. of Copies
(1-10). (You cannot specify number of copies
when Index Print is selected.)
: You can set the print size from Default
Print Size
Printer, 4x6, 5x7, 8x10, or Letter. (Print sizes may
vary according to the type of printer you have.)
: You can imprint the date on your
Date Stamp
pictures. Select
be available depending on the type of printer you
have.)
4. When you have finished selecting the printer
settings, select
Print
128 Section 2K. Camera
, , or
Index Print
DPOF Print
or . (Date stamping may not
Yes No
.
Note While you are connected to the printer, your
phone's screen will display "Phone Off." You cannot
make or receive calls during this time.
5.
When printing is finished, press
, press
6.
Press
Yes
display to unplug the USB cable from the phone.
PictBridge
Error
Messages
(left softkey). Follow the instructions on the
From time to time you may encounter
printing problems. Any printer error
messages will be displayed on your phone,
informing you of the specific problems
encountered. Please refer to the user's guide
that came with your printer for descriptions,
explanations, and possible resolutions for
any error messages.
.