Accessing Sms Voice Messages - Sanyo SCP-7050 User Manual

Sending SMS Voice Messages to Group Members
To register a group for SMS Voice Messages:
1.
Select
2.
Select Options (right softkey) > Group Send > Options
(right softkey) > Add New.
Note: When no groups are stored, select Options (right softkey)
> Group Send > Yes .
3.
Enter a name for the group and press OK (left softkey).
4.
Select Contacts, Phone#, Email, or Others (right softkey)
and select members for the group.
5.
Press Save (left softkey).
To send SMS Voice Messages to Group Members:
1.
Select
2.
Select Options (right softkey) > Group Send.
3.
Select a group to which you would like to send an SMS
Voice Message and select Continue (left softkey).
4.
Follow steps 4-6 in "Composing SMS Voice Messages"on
the previous page.

Accessing SMS Voice Messages

To play an SMS Voice message:
When you receive a voice message, a pop-up notification
will automatically be displayed on your phone's screen.
Use your softkeys to view and play the voice message.
To reply to an SMS Voice message:
1.
From the SMS Voice inbox, select Reply (left softkey).
2.
Record your reply, and then select Send (left softkey).
Tip:
If an SMS Voice message has several recipients, select Options
(right softkey) > Reply > Reply All to reply to all the recipients of
the message, or Reply to Sender to reply only to the person
who sent you the message.
194 Section 3A: Sprint Service Features – The Basics
> Messaging > VoiceSMS.
> Messaging > VoiceSMS.