Sms Voice Messaging; Composing Sms Voice Messages; Accessing Sms Voice Messages; Caller Id - Sanyo SCP-3810 Operating Manual

SMS Voice Messaging

SMS voice messaging lets you send a voice message to other SMS-enabled phones or to
working email addresses without making a phone call. Just record a message and send it
directly to the recipient's phone messaging inbox.

Composing SMS Voice Messages

1. Press MENU/OK > Messages > Send Message > Voice SMS.
2. Select a recipient from the list or from the following options.
Go to Contacts to select a recipient from your Contacts. (Qualifying Contacts
entries must contain a phone number or an email address.)
MULTIPLE (left softkey) to select multiple recipients. Press CONTINUE (left
softkey) when you have finished entering recipients. (You may include up to 25
recipients per message.)
NEW ADDRESS (right softkey) to enter a recipient's phone number or email
address directly. Press CONTINUE (left softkey) to proceed.
3. Start recording after the beep. (You can record up to two minutes.)
4. To finish recording, press DONE (left softkey).
5. Press SEND (left softkey) to send the voice message.

Accessing SMS Voice Messages

► When you receive a new voice message, your phone will display a notification
message. Use your softkeys to access and play the voice message.
- or -
1. Press MENU/OK > Messages > Voice SMS.
2. Highlight a message and press MENU/OK to play. (To display the message options,
press OPTIONS [right softkey].)
To reply to an SMS Voice message:
1. While the message is displayed, press REPLY (left softkey).
Note: Press OPTIONS (right softkey) > Reply with to reply with a piture message or a text
message.
2. Record your reply, and then press DONE (left softkey) > SEND (left softkey).
- or -
1. Press MENU/OK > Messages > Voice SMS.
2. Highlight a message you want to reply and press REPLY (left softkey).
3. Record your reply, and then press DONE (left softkey) > SEND (left softkey).

Caller ID

Caller ID allows people to identify a caller before answering the phone by displaying the
number of the incoming call. If you do not want your number displayed when you make a
call, follow these steps.
1. Press * 6 7.
2. Enter the number you want to call.
3. Press TALK.
59