Operation Sounds - Sanyo Xacti VPC-C4 Instruction Manual

OPERATION SOUNDS

This setting allows you to set whether or not a confirming audio signal sounds
when the operation buttons (still image shooting button, SET button, MENU
button, etc.) are pressed.
1
Display the Option Screen (page 111).
2
Select the operation beep icon ?,
and press the SET button.
h The Operation Beep Setting Screen
appears.
h The current settings are shown on
the screen.
h If "ALL OFF" is selected and the
SET button pressed, all the
operation sounds are muted.
h If "EXIT" is selected and the SET
button pressed, you are returned to
the Option Screen.
TURN ON/OFF:
Mute or enable the sound that is
produced when the power is turned
on or off.
SHUTTER:
Select the sound that is produced
when the still image shooting button
is pressed, or when a photo is
taken using the self-timer.
KEY SW:
Select the sound that is produced
when the SET button, MENU
button, etc. are pressed.
AUDIO GUIDE:
Mute or enable the camera's audio
help guide.
OPERATION BEEP
TURN ON/OFF :ON
SHUTTER : D
KEY SW : A
AUDIO GUIDE : ON
CHANGE SETTINGS
ALL OFF
EXIT
English
116