Checking The Remaining Card Memory - Sanyo Xacti VPC-C4 Instruction Manual

CHECKING THE REMAINING CARD MEMORY

You can check how many images can be captured and how much recording
time is available on the card. For a table showing the maximum number of
images and recording time for specific cards, please see "Possible No. of
Images/Possible Shooting Time/Possible Recording Time" on page 178.
Checking the remaining number of images and video recording time
1
Set the main switch to REC, and
turn on the camera (page 40).
h The remaining number of images
appears in the upper left of the LCD
monitor.
h The remaining video recording time
appears in the upper right of the
LCD monitor.
h The remaining number of images
and video recording time will differ
depending on the resolution and
compression settings.
h When the remaining number of
images or the remaining video
recording time is "0", you cannot
capture any more images. To
capture more images, either install
a new card, or save the images to a
computer and then erase them
(page 92) from the card.
h When the remaining number of
images or the remaining video
recording time is "0", it may be
possible to capture a few more
images by setting a lower resolution
setting (page 67), or selecting a
different image quality setting.
Remaining number of images
Remaining video
recording time
12
English
00:00:15
132