Promag 50 PROFIBUS-PA
Endress+Hauser
3.2.2
Brief description of the function matrix
Note:
• See the general notes on Page 20.
• Function descriptions → see the "Description of Device Functions" manual
HOME position →
1.
2.
Select a function group (e.g. OPERATION)
3.
Select function (e.g. LANGUAGE)
Change parameter / enter numerical values:
key → Select or enter release code, parameters, counter values
key → Save the entries
4.
Exit the function matrix:
– Press and hold down Esc key (
– Repeatedly press Esc key (
Fig. 6:
Selecting functions and configuring parameters (function matrix)
→ Enter the function matrix
) for longer than 3 seconds → HOME position
) → return step by step to HOME position
3 Operation
19