Brief Guide To The Function Matrix - Endress+Hauser PROline promag 10 Operating Instructions Manual

PROline Promag 10
!
Endress+Hauser
5.2

Brief guide to the function matrix

Note!
• Please refer to the general notes on Page 50.
• Function matrix overview → Page 92
• Detailed description of all functions → Page 93 ff.
The function matrix is a two-level construct: the groups form one level and the groups'
functions the other. The groups are the highest-level grouping of the control options for
the measuring device. A number of functions is assigned to each group.
You select a group in order to access the individual functions for operating and
configuring the measuring device.
Example of how to configure a function (in this case changing the language for the UI):
HOME position → F → Enter the function matrix
1.
2. Select a function group (e.g.USER INTERFACE)
3. Select a function (e.g. LANGUAGE)
Change parameters / enter numerical values:
O S → Select or enter release code, parameters, numerical values (e.g. change
language from English to German)
F → Save entries
4. Exit the function matrix:
– Press and hold down the Esc key (X) for more than 3 seconds → HOME position
– Repeatedly press Esc key (X) → Return step by step to HOME position
Esc
-
➀
➁
Fig. 36: Selecting and configuring functions (function matrix)
+
E
Esc
–
E
➂
E E
Esc
+
–
+
–
E
E
E
E
➃
> 3 s
Esc
+ +
–
E E E
5 Operation
49