Table of Contents
Advertisement
locations for valet/program switch
IMPORTANT! When the vehicle is delivered, please show the user where this switch is lo cat ed and
how to disarm the system with it.
Ensure that the location you pick for the switch has sufficient clearance to the rear. The switch should be well
hidden. It should be placed so pas sen gers or stored items (such as in a glove box or center console) cannot
accidentally hit it. The switch fits into a
This system has Remote Valet. The user can enter and exit Valet Mode without having to reach the Valet/Program
switch. This feature was introduced so that switch location was less critical in day-to-day use. As long as the
Valet/Program switch can be reached to disarm without a transmitter, easy access is not important.
locations for the status LED
Things to remember when po si tion ing the Status LED:
■ It should be visible from both sides and the rear of the vehicle, if possible.
■ It needs at least
1
/
-inch clearance to the rear.
2
■ It is easiest to remove a small panel, such as a switch blank or a dash bezel, before drilling a
hole.
■ Use quick-disconnects near the LED wires if the panel is re mov able. This lets me chan ics or other installers
remove the pan el with out cut ting the wires.
© 2005 Directed Electronics—all rights reserved
/
-inch hole.
9
32
DRAFT
/
-inch
9
32
9
Advertisement
Table of Contents
Troubleshooting
