Directed Electronics 7900 Installation Manual page 41

remote control programming
The remote control has programmable features that can be changed to fit the users preferences. Programming
can be performed anytime using the programming and function buttons to select the feature menus and
change feature settings.
Function button operations during programming:
• Press the or
• Press the button to choose the highlighted item
• Press the
Enter programming:
Press and hold for 3 seconds the round programming button on the rear of the remote control. The program-
ming main menu will appear. Use the function buttons as described above to navigate and change the
features.
Exit Programming:
Press the button anytime to save the settings and exit programming, or, if more than 10 seconds lapses
between button presses, the remote control will automatically save the settings and exit programming
mode.
Power off sleep mode:
This setting will make the remote control go to sleep. It will not respond to any RF signals or function button
presses.
1. Enter programming mode
2. Scroll to highlight the Clock icon
3. Press the button to choose the Clock and access Clock set screen
4. Scroll and highlight a digit or A/P and then press the
5. Press the
Wake Up the remote control:
To wake up the remote control press and hold the program button for 3 seconds. The display will cycle
through all available animations and icons before becoming active.
Set the 12 hour Clock:
1. Enter programming mode
© 2005 Directed Electronics—all rights reserved
button to scroll and highlight menu and feature items.
button to exit programming anytime
DRAFT
button anytime to save the new setting and exit.
button to change the digit.
41