FireplaceXtrordinair ProBuilder GSB2 42 Owner's Manual page 12

12

Remove the glass frame following the directions below.
Open the latches holding the glass frame in place (start with
a
the bottom) - follow the directions shown to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it should
be parallel with the front of the fireplace when installed.
© Travis Industries
Maintenance
NOTE:
You may need to lift
the glass frame
while re-attaching.
Replacement Glass Frame Part #
42 ProBuilder
54 ProBuilder
72 ProBuilder
8/7/19 - 1451
Pliers may be used
Latch
Catch
(on glass frame)
250-04491
250-04689
250-04654
Top of
Firebox
Glass
PB Lin GSB2 Operation