Frank bSteam bS35 VAC Operating Instructions Manual page 31

Table of Contents

Advertisement

Available languages

Available languages

Only use original accessories that guarantee the best quality and greatest safety. In
the event of failure to comply with this recommendation, the manufacturer shall not be
liable for any resulting damage.
To switch off the appliance, turn off all switches (steam and
Switch off suction function) on the handle (Fig. 13); all
Switch off the switch on the appliance (Fig. 14) and remove the plug.
from the socket.
Only operate the unit via the switches, never through the
Plugging in and pulling out the plug from the
Switch the socket on and off.
Never pull the cable to remove the plug from the
to pull the plug from the socket.
After the cleaning work, the dirty water tank
(2) Empty and clean the accessories used.
Important comments:
Your steam vacuum cleaner, like any other technical device, must only be used in
accordance with the instructions.
No material such as concrete or mortar scrap may be sucked up together with
moisture, as the material could harden and become encrusted in the dirty water tank,
which would permanently damage the filters and consequently the motors.
The dirty water tank must be cleaned frequently for hygienic reasons (bad smell, etc.)
and for proper operation. Use suitable protective clothing before handling the dirty
water tank (gloves, protective mask, etc.).
Switch off steam vacuum cleaner
13
Fig. 13
Fig. 14

Advertisement

Chapters

Table of Contents
loading

Related Products for Frank bSteam bS35 VAC

Table of Contents