Frank bSteam bS35 VAC Operating Instructions Manual page 29

To stop steam production or turn off the suction function, release the push button
and/or turn off the switch.
To increase the effect of the steam, water or chemicals can be sprayed through the
accessories by pressing the pump switch (12) and the switch (20).
If the water or chemical tank (15) is empty, spraying will be blocked until fluid is
refilled.
NOTICE:
When you have finished cleaning, we recommend that you leave the suction function
on for a few seconds to remove the water and steam residue in the pipes.
Use of the accessories:
The device is equipped with various accessories,
to meet all needs.
In order to mount the various accessories or
it is sufficient to insert the part into the receiving piece.
or pull it out (Fig. 8).
Select the accessories that are suitable for use on the
is most suitable.
Only replace the accessories after the switches on the handle have been switched off.
Never replace accessories when steam is being generated:
Risk of burns!
Multi-purpose brush:
Due to the joint, the brush can rotate 360° and thus clean particularly hard-to-reach
places.
This brush consists of a universal part, which can be equipped with the following parts
as required:
➢ Bristle strip for hard floors and surfaces
➢ Bristle strip for carpets and rugs
MOUNTING THE MULTI-PURPOSE BRUSH:
For mounting the bristle strip for carpeted floors and
carpets, the stiff brushes with inwardly directed
Push the lobes into the guides intended for this purpose.
(Fig. 9).
11
Fig. 8
Fig. 9