Frank bSteam bS35 VAC Operating Instructions Manual page 30

In order to transfer the complete insert to the multi-purpose brush
mount, it is sufficient to place the part on the brush and
firmly until the hook engages in the seat (Fig. 10).
To disassemble the insert, remove the small lever from the
Hack out the body of the multi-purpose brush.
crevice nozzle:
The crevice nozzle can be used for special cleaning jobs: to clean joints between tiles,
joints on seats or sofas and to clean particularly dirty areas.
Upholstery nozzle:
This is used for cleaning sofas, armchairs, mattresses, car seats and particularly
narrow places where the multi-purpose brush cannot reach.
Window wiper:
The window wiper is particularly suitable for cleaning windows.
and mirrors.
Use the window wiper as follows:
Spray steam over the entire surface, placing the rubber
➢
lip place the rubber lip directly on the pane.
Press the rubber lip onto the windscreen and move the
➢
wiper Move the wiper from top to bottom
(Fig. 11).
Extension Tubes:
If necessary, mount the extension tubes and adjust them
in their Block position. Only one tube can also be used
(Fig. 12).
Fig. 10
Fig. 11
Fig. 12
12