Frank bSteam bS35 VAC Operating Instructions Manual page 25

Upholstery Cleaning:
Before cleaning upholstery with the steam cleaner, first check the area to be cleaned
by testing the steam on a small area and allowing the area to dry. Then check whether
the fabric has been deformed or the colours have changed.
Clean covered or painted surfaces:
Never direct the steam against glued edges, as the strips could peel off.
Do not use the appliance on wooden floors or unsealed parquet.
Be very careful when cleaning kitchen furniture, home furniture, doors, wooden floors,
painted surfaces or surfaces covered with plastic!
Prolonged exposure to steam can damage the wax, polish, plastic trim or paint, cause
bubbles or cause it to come off. We recommend cleaning these surfaces only with a
steamed cloth or steaming them briefly with a double-layered cloth.
Use of the device for cleaning glass surfaces:
To avoid damaging the frame seals, do not direct the steam flow at sealed areas of the
glass surfaces.
When outside temperatures are low, especially in winter, warm up the glass surface by
steaming it briefly before cleaning. In this way, the temperature difference between
the outer and inner surfaces is evened out and stresses that can lead to breakage of
the glass surface are reduced.
NOTES ON USE
EXPLANATION OF THE SYMBOLS
Never use the steam jet
against itself and/or
other persons, animals,
Devices with electrical
components (such as the
furnace interior).
The escape of the
hot steam or
Water can lead to
lead to burns.
Maximum generated
Accessories performance
7