Frank bSteam bS35 VAC Operating Instructions Manual page 26

Explanation of the device components:
1. Device body
2. Dirty water tank
3. Handle for transport
4. Electrical cable
5. Pressure gauge
6. Locking hook
7. Red light for low water
in the boiler
8. Green light for operating
readiness
9. Filling plug of the boiler
10. Main switch
USE OF THE STEAM VACUUM CLEANER
11. Boiler switch 1
12. Boiler switch 2
13. Probe dirty water tank full.
When the dirty water tank is full
the probe (13) switches the motor on
and off automatically off.
Set the device to operation reset.
14. steam regulator
15. Container for water/chemicals
16. Socket for
the accessories
17. Rear socket for the
blow function
18. Push button for steam generation
(on the handle)
19. Switch for the suction function
(on the handle)
(if you keep this push button pressed,
the suction power increased)
20. Switch for chemicals
(on the handle)
8