Connecting Through A Kv-L20R/V (Kv-3000/5000-Series Unit) - Omron NV3W Connection Manual

Connecting through a KV-L20R/V (KV-3000/5000-series Unit)

8-7 Connecting through a KV-L20R/V (KV-3000/5000-series
Unit)
PLC Model Selection
Applicable Devices
Bit/word devices
Bit devices Input relays
Output relays
Internal auxiliary relays
Link relays
Control relays
Internal auxiliary relays
Latched relays
Work relays
Timer contacts
Counter contacts
High-speed counter compara-
tor contacts
Word devices Data memory
Controller memory
Temporary data memory
Expansion data memory
File registers, current bank
File registers, continuous
Link registers
Work memory
Double-word devices Digital trimmers
Timer current values
Counter current values
High-speed counter current
values
Timer preset values
Counter preset values
High-speed counter compara-
tor preset values
Index registers
Communications Settings
78
Select Keyence KV3000/5000 Series.
R 00000 to R 99915
B 0000 to B 3FFF
CR 0000 to CR 3915
MR 00000 to MR 99915
LR 00000 to LR 99915
VB 0000 to VB 3FFF
T 0000 to T 3999
C 0000 to C 3999
CTC 0 to CTC 3
DM 00000 to DM 65534
CM 00000 to CM 05999
TM 000 to TM 511
EM 00000 to EM 65534
FM 00000 to FM 32767
ZF 000000 to ZF 131071
W 0000 to W 3FFF
VM 00000 to VM 59999
TRM 0 to TRM 7
TC 0000 to TC 3999
CC 0000 to CC 3999
CTH 0 to CTH 1
TS 0000 to TS 3999
CS 0000 to CS 3999
CTC 0 to CTC 3
Z 01 to Z 12
The following communications settings are recommended for the PT and
PLC.
■
PT Communications Settings (Set from the NV-Designer using the NV
Configuration.)
Item
Baud rate 9,600 bps, 19,200 bps, 38,400 bps, 57,600 bps, or 115,200 bps
Data bits 8
Stop bits 1
Parity Even
No.
Outputting to high-speed
counter comparators is not
possible.
Outputting to digital trimmers
is not possible.
Setting
Section 8-7
Comments