Connections And Interfaces; Microsd Card Connection - KERN OIV-3 Instruction Manual

8 7
9
OIV-3-BA-e-2310

5.5 Connections and interfaces

To operate the measuring software, a mouse must
be connected via the USB port. To do this, plug the
USB receiver, which is located in the battery
compartment of the supplied wireless mouse, into
one of the two USB slots (7).
A USB stick (max. 128 GB) must be connected for
data storage.
The image can be transferred to another output
device at the additional HDMI output (8).

5.6 MicroSD card connection

On the back of the device is a slot for a MicroSD
memory card. The port provides an additional option
for storing data (max. 128 GB). Use a pointed object
to push the MicroSD memory card into the card slot
until it is fully engaged.
10