Checking And Charging The Battery Pack While In The Carrying Case - Defibtech RMU-2000 Manual

3.14 Checking and Charging the Battery Pack While in the Carrying Case

If the Compression Module is stored in the Carrying Case with a Battery Pack installed, the
charge level of the Battery Pack can be checked by briefl y pressing the Power ON/OFF button
through the viewing window located on the underside of the case, as shown here:
The Battery Pack installed in the Compression Module can be charged while remaining inside the
Carrying Case. To do this, open the Charging Access Flap located on the back of the Carrying
Case and connect the AC Adapter plug to the external power input jack on the Compression
Module, as shown here:
Charging
Access Flap Access Flap
For more details about the charging the Battery Pack and the Battery Pack indicators, see
Section 3.11.
30
RAC-A2510EN-DC rev B
Control Panel
Viewing
Window
Carrying Case
(bottom view)
Carrying Case
(back view)
Battery Pack Indicators
(on Compression Module's
Control Panel)
External Power
AC
Input Jack
Adapter
(on Compression
Plug
Module)