AS700GB
11/24/04 10:54 AM
Operating VCR (DVD) with
Remote Control
47
Page 47
1
Press MODE button to make VCR indicator
on the remote control flash.
If you operate DVD, press Device Select button to make DVD
•
indicator on the remote control flash.
2
Press POWER(
VCR (DVD).
3
Point the remote control toward the VCR
(DVD).
While holding down POWER(
4
enter the code corresponding to your brand
of VCR (DVD).
If the code matches the VCR (DVD)'s code, the VCR (DVD) will
•
be turned off.
If there is more than one code listed for your VCR (DVD) in the
•
table, enter one at a time to determine which code works.
Ex)For a 'Samsung' VCR (DVD)
If VCR (DVD) is turned on or off when you press
5
the power button of the remote controller, the
setting is completed.
You can use VCR (DVD) POWER, VOLUNE, PLAY, PAUSE,
•
STOP, SKIP and Numeric button (0~9).
The remote control may not work on some brands of VCR (DVD)s. Also, some operations may not
•
be possible depending on your brand of VCR (DVD).
If you do not set the remote control with the code for your brand VCR (DVD), the remote control
•
work on a Samsung VCR (DVD) by default.
) button to turn on the
While holding down POWER(
button to enter 00, 32~45, 87, and 88.
) button,
) button, use the Numeric