Releasing the Inner Rail
Each inner rail has a locking latch. This latch prevents the server from coming completely
out of the rack when when the chassis is pulled out for servicing.
To mount the rail onto the chassis, first release the inner rail from the outer rails.
Releasing Inner Rail from the Outer Rails
1. Pull the locking tab up to release the inner rail and pull out.
2. Halfway, push the middle rail lever down.
3. Pull the inner rail out of the outer rail until it is fully extended as illustrated below.
4. Repeat for the other outer rail.
2
Figure 2-2. Releasing the Inner Rails
19
Chapter 2: Server Installation
1
3