Changing the Power Supply
1. Determine which power supply needs to be replaced and unplug the power cord to that
module.
2. Push the release tab (on the back of the power supply) as illustrated, to release the
power module from the chassis.
3. While holding down the release tab, pull the power supply out using the handle provided
on the power module.
4. Replace the failed power module with the same model power supply.
5. Push the new power supply module into the power bay until the tab clicks into the
locked position.
6. Plug the AC power cord back into the module and the replacement power module will
automatically power-up.
Chapter 3: Maintenance and Component Installation
46