Advertisement
4
MANAGING XX-1800G USING XX-MANAGER
After the initial setup has been completed, the XX-Manager web interface can be accessed via the device's Ethernet management
port [2], either locally or over the network.
A
Connect the XX-1800G's Ethernet management port
cable. Keep in mind, in case you connect the unit directly to a computer, manual IP policy must be applied for
both the unit and the computer. Additionally, if the computer network interface is only 10/100M capable, a
twisted pair special cable must be used instead of a normal patch cable.
B
To access the XX-Manager interface, type https://<ip_ addr > in your browser (Firefox or Chrome recom-
mended) with <ip_addr> being the units' static or DHCP provided IP.
C
On success,
D
Login, using the credentials configured during the initial setup (see: step 3).
E
The main XX-Manager screen is displayed. For more information on XX-Manager, please refer to the
Installation and Configuration Manual.
5
MANAGING XX-1800G THROUGH CLI OVER SSH
After the initial setup has been completed, the management CLI can be accessed via the device's Ethernet management port [2],
either locally or over the network.
A
Provided the device is connected to a network or directly to a computer (see: step 4a), connect to XX-1800G
through SSH (default port 22), using its static or DHCP provided IP.
14
16
13
15
17
B
Login, using the credentials configured during the initial setup (see: step 3).
C
For more information on available CLI commands, please refer to the Installation and Configuration Manual.
Download the latest user manual from
override any browser certificate alert
18
20
22
19
21
Profitap HQ B.V. — High Tech Campus 84 — 5656AG Eindhoven — The Netherlands
info@profitap.com — +31 (0) 40 782 0880 — www.profitap.com
[2]
to a network or computer, using an RJ45 Ethernet
to continue. XX-1800G prompts with its Status Page.
24
26
23
25
www.profitap.com/resource-center/
v1.7
28
30
27
29
31
32
34
33
35
Advertisement
