Verifying system memory in Windows 10
1. Click or tap Windows > All Settings
2. Under System, select About.
Verifying system memory in Windows 7
Click Start > Control Panel > System.
Verifying system memory in setup
1. Turn on or restart your laptop.
2. After the Dell logo is displayed, tap F2 until the Entering BIOS setup message appears. To enter the Boot selection menu,
tap F12
3. On the left pane, select Settings > General > System Information,
The memory information is displayed on the right pane.
Testing memory using ePSA
1. Turn on or restart your laptop.
2. Perform one of the following actions after the Dell logo is displayed:
● With keyboard — Press F2.
● Without keyboard — Press and hold the Volume Up button when the Dell logo is displayed on the screen. When the F12
boot selection menu is displayed, select Diagnostics from the boot menu, and press Enter.
The PreBoot System Assessment (PSA) starts on your laptop.
NOTE:
If you wait too long and the operating system logo appears, wait until you see the desktop. Turn off the laptop
and try again.
> System.
Technology and components
47