Protected Menus - Toro 03966 Operator's Manual

Settings
About
Service
Menu Item
Hours
Counts
Diagnostics
Menu Item
Cutting Units
Hi/Low Range
PTO
Engine Run
Settings
Menu Item
Units
Language
LCD Backlight
LCD Contrast
Front Backlap Reel Speed
Rear Backlap Reel Speed
Mow Speed

Protected Menus

The Settings menu allows
you to customize and modify
configuration variables on the
InfoCenter display.
The About menu lists the
model number, serial number,
and software version of your
machine.
Description
Lists the total number of hours
that the machine, engine and
PTO have been on, as well
as the number of hours the
machine has been transported
and service due.
Lists numerous counts the
machine has experienced.
Description
Indicates the inputs, qualifiers,
and outputs for raising and
lowering the cutting units.
Indicates the inputs, qualifiers,
and outputs for driving in
transport mode.
Indicates the inputs, qualifiers,
and outputs for enabling the
PTO circuit.
Indicates the inputs, qualifiers,
and outputs for starting the
engine.
Description
Controls the units used on the
InfoCenter. The menu choices
are English or Metric.
Controls the language used
on the InfoCenter*.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.
Controls the speed of the front
reels in backlap mode.
Controls the speed of the rear
reels in backlap mode.
Controls the ground speed for
determining the reel speed.
Allows a person
(superintendent/mechanic)
authorized by your company
with the PIN code to access
protected menus.
Protect Settings
Acceleration
Blade Count
Height of cut (HOC)
F Reel RPM
R Reel RPM
Mow Speed
Trans. Speed
Smart Power
* Only "operator-faced" text is translated. Faults,
Service, and Diagnostics screens are "service-faced".
Titles are be in the selected language, but menu items
are in English.
Protected under Protected Menus—accessible only
by entering PIN
About
Menu Item
Model
SN
Machine Controller Revision
InfoCenter Revision
CAN Bus
Protected Menus
There are operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter.
To lock these settings, use the Protected Menu.
Note:
At the time of delivery, the initial password
code is programmed by your distributor.
26
Allows the ability to change
the settings in the protected
settings
Low, Medium, and High
settings control how quickly
the traction speed reacts when
you move the traction pedal.
Controls the number of blades
on the reel for reel speed.
Controls the height of cut
(HOC) for determining the reel
speed.
Displays the calculated reel
speed position for the front
reels. The reels can also be
manually adjusted.
Displays the calculated reel
speed position for the rear
reels. The reels can also be
manually adjusted.
Controls the maximum speed
while in mow (low range)
Controls the maximum speed
while in transport (high range)
Turns Smart Power on and off
Description
Lists the model number of the
machine.
Lists the serial number of the
machine.
Lists the software revision of
the master controller.
Lists the software revision of
the InfoCenter.
Lists the machine
communication bus status.