Replacing The Tec Fuse - Toro 03966 Operator's Manual

Figure 94
1. Fuse block
4. Rotate the seat and seat base closed and latch
the base (Figure
Figure 95

Replacing the TEC Fuse

1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Unlatch and open the hood; refer to
Hood (page 43).
3. At the front, left side of the engine, remove the
cover of the in-line fuse holder.
95).
43).
Opening the
1. TEC fuse
g420144
4. Replace the open fuse with a fuse of the same
type and amperage rating.
5. Assemble the cap to the in-line fuse holder.
6. Close and latch the hood; refer to
Hood (page
g419732
57
Figure 96
Closing the
43).
g422229