Hazards And Safety Provisions During Servicing - Angelo Po 0S1FR1E Manual

SAFETY

HAZARDS AND SAFETY PROVISIONS DURING SERVICING

During servicing, watch out for the following hazards and provide for the countermeasures
indicated below:
► Source of hazard: appliance mechanics
Hazard
Risk of cutting due
to sharp edges
► Source of hazard: risks associated with the environment in which the appliance is used
Hazard
Presence of satu-
rated steam
NOTE: Only applies to electrical appliances.
► Source of hazard: electric power
Hazard
Risk of electric
shock caused by
live components
3395260_ut_GB_rev.1
Where or in which situations
does the hazard occur?
When handling sheet-
metal parts
Where or in which situations
does the hazard occur?
Condensation and drip-
ping on electrical parts
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
Countermeasures
• Pay special care during
this activity
• Wear personal protective
equipment in accordance
with safety regulations
Countermeasures
• Periodic servicing of the
appliance wiring diagram,
to be carried out only by
expert technicians of an au-
thorised customer service
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" of the installa-
tion manual.
• Disable the power supply
before removing the pro-
tections
ENGLISH
Safety device
None
Safety device
None
Safety device
• Protection
panels
• System
switch-dis-
connector
9