1) Selection Of Location And Space
(A) Indoor Unit
Install the fan coil (indoor) unit at a location with the following requirements
• Location is suitable for wiring, piping and drainage.
• No obstruction of air flow into and out of unit where cooler air can be evenly distributed.(See fig. 1)
Ensure that air discharge is not short circuited with air intake.
•
Ensure that wall is sufficiently strong, rigid, flat, perpendicular and vibration free.
•
Where air filter cassette can be slided in or out easily.
•
Where there is no danger of flammable gases.
•
Where there is no direct sunlight on unit.
•
Also to take into consideration a place for the installation of the Wireless LCD Remote Controller.
•
MAINTENANCE & SERVICING SPACE
AIR FLOW DIRECTION
CAUTION : Do not install unit near the door way
because excessive fresh air may cause
panel condensation on the unit.
Fig. 1
19