ON Semiconductor NB3N5573DTGEVB User Manual

NB3N5573DTGEVB
NB3N5573DTGEVB
Evaluation Board User's
Manual
Device Name: NB3N5573DTG (TSSOP−16)
Board Name: NB35573DTGEVB
Description
The NB3N5573 is a high precision, low phase noise clock
generator that supports PCI Express and Ethernet
requirements. The device takes a 25 MHz fundamental
mode parallel resonant crystal and generates differential
HCSL output at 25 MHz, 100 MHz, 125 MHz or 200 MHz
clock frequencies.
See datasheet NB3N5573/D (www.onsemi.com).The
NB3N5573DTGEVB Evaluation board is designed to
provide a flexible and convenient platform to quickly
program, evaluate and verify the performance and operation
of the NB3N5573DTG TSSOP−16 (Package Case 948F)
device under test: With the device removed, this
NB3N5573DTGEVB Evaluation board is designed to
accept a 16 Lead TSSOP Socket (M&M Specialties, Inc.,
1−800−892−8760, www.mmspec.com,
#50−000−00809) to permit use as an insertion test fixture.
FRONT
© Semiconductor Components Industries, LLC, 2012
February, 2012 − Rev. 1
M&M
Figure 1. NB3N5573DTGEVB Evaluation Board
1
http://onsemi.com
EVAL BOARD USER'S MANUAL
Board Features
•
Crystal mount source, or input external clock source
(SMA)
•
A TSSOP−16 NB3N5573DTG device is solder
mounted or the board may be adapted for insertion
testing by adding a TSSOP−16 socket.
•
Separate supply connectors for VDD (banana jack and
Anvil Clip) and GND (banana jack)
Contents
Description
Board Features
Board Layout Maps
Test and Measurement Setup Procedures
Appendix 1: Pin to Board Connection Information
Appendix 2: Schematic
Appendix 3: Bill of Materials, Lamination Stackup
BACK
Publication Order Number:
EVBUM2065/D