Power Connection - Samsung NV7B441 Series User & Installation Manual

NOTE
Depending on the model, this oven comes in two types: single door and dual door.
Accessories
The oven comes with different accessories that help you prepare different types of
food.
Wire rack Wire rack insert *
Universal tray * Extra-deep tray *
Meat probe * 2 screws (M4 L25)
NOTE
Availability of accessories with an asterisk (*) depends on the oven model.

Power connection

01 BROWN or BLACK
02 BLUE or WHITE
03 YELLOW and GREEN
Baking tray *
Check the output specifications on the label attached to the oven.
Divider
Open the rear cover of the oven using a screwdriver, and remove the screws on
the cord clamp. Then, connect the power lines to the relevant connection terminals.
The ( )-terminal is designed for earthgrounding. First connect the yellow
and green lines (earthgrounding), which must be longer than the others. If
you use a plug-type socket, the plug must remain accessible after the oven is
installed. Samsung is not responsible for accidents caused by missing or faulty
earthgrounding.
Steam tray *
WARNING
Do not step on or twist the wires during installation, and keep them away from
heat-emitting parts of the oven.
Plug the oven into an electrical socket. If
a plug-type socket is not available due to
allowable current limitations, use a multi-
pole isolator switch (with at least 3 mm
L N
spacing in-between) in order to meet safety
regulations. Use a power cord of sufficient
01 02 03
length that supports the specification H05
RR-F or H05 VV-F, min. 1.5 ~ 2.5 mm².
Rated current(A) Minimum cross-sectional area
10 < A ≤ 16
16 < A ≤ 25
1.5 mm²
2.5 mm²
English 7