Axis P1468-LE Repainting Instructions page 3

AXIS P14 and AXIS Q19 Camera Series
Repaint the product
Repaint the product
Preparations
• If applicable, disassemble the device according to the instructions in this document.
• Clean all parts that will be repainted thoroughly to remove grease, dust, or oil.
• To ensure reassembly and functionality of the product, mask any openings (for example for screws, LED indicators,
or microphones) before you paint.
• To avoid unwanted reflections, mask the inside of the weathershield before you paint.
Pretreatment of parts
Depending on the part material and type of coating applied at factory, pretreatment might be necessary for the new coating to
adhere well. Before you apply a new coating, we recommend the following pretreatment:
1. If necessary, roughen up the surface with a light sandpaper or similar to increase adhesion. Alternatively, remove the
original coating down to base material.
2. Clean the parts properly to remove oil, grease, and dust.
3. If necessary, apply a primer layer suitable for the specific material to increase adhesion to the parts. For outdoor products,
we recommend a primer to improve corrosion resistance.
We recommend pretreatment of parts made of the following materials:
• powder coated
• wet painted
• anodised
• chromated
• stainless steel
• other metal
• plastic
3