Advertisement
Operation
5
Operating the Remote Control
NOTE:
On start up, your ceiling fan will oscillate back and forth. This is NORMAL OPERATION for a DC ceiling fan as it goes through its
calibration cycle. The fan is NOT DEFECTIVE.
Part
Symbol
Part
Symbol
+
A
E
B
F
C
G
+
-
D
H
All ON/ OFF: Press and release the
Fan ON/ OFF: Press and release the
Light ON/ OFF: Press and release the
Speed functions:
+
Button (D): Increases the fan speed
Press and release the
-
Button (D): Decreases fan speed
Press and release the
Dimmer functions:
+
Button (E): Increases the brightness of the light
Press and release the
-
Button (E): Decreases the brightness of the light
Press and release the
Press and release the
- Alternates through speeds 1-5.
- Press and hold the button (F) for 3 seconds to cancel the comfort Breeze mode.
Press and release the
Timer function
- The timer function is only available for fan, not for the light kit.
- The timer function can only be activated when the fan is ON.
- Press the (2H/4H/8H) button (H) to set the timer.
- Hold and press the (2H/4H/8H) button (H) for 3 seconds to cancel the timer.
- When the timer is activate, press the (2H/4H/8H) button (H) again will reset the timer.
-
button (A) to turn the fan and light ON or OFF.
button (B), the fan will turn ON and OFF accordingly.
button (C), the light will turn ON and OFF accordingly.
+
button (D) one time will increase the speed of the fan.
-
button (D) one time will decrease the speed of the fan.
+
button (E) one time will increase the brightness of the light.
-
button (E) one time will decrease the brightness of the light.
button (F) will activate the Comfort Breeze mode.
button (G) to change the light colour from warm light to white light.
LED light
9
Please contact 1-855-HD-HAMPTON for further assistance.
ALL
B
ON / OFF
ON / OFF
D
6 SPEED
BRIGHTNESS
F
BREEZE
COLOR TEMP.
H
4
2
8
HR
HR
HR
TIMER
HAMPTONBAY.COM
A
C
E
G
Advertisement
