Advertisement
Table of Contents
Table of Contents ................................................................ 2
Safety Information ............................................................... 2
Warranty ............................................................................... 3
Pre-Installation .................................................................... 3
Installation ............................................................................ 6
Safety Information
READ AND SAVE THESE INSTRUCTIONS.
□
All wiring must be in accordance with the National Electrical
Code ANSI/NFPA 70 and local electrical codes. Electrical
installation should be performed by a qualified licensed
electrician.
□
To avoid personal injury or damage to the fan and other items,
use caution when working around or cleaning the fan.
□
All setscrews must be checked and retightened where
necessary before installation.
Operation ........................................................................... 9
Care and Cleaning ............................................................. 11
Troubleshooting ................................................................. 11
...................................................................12
WARNING: To reduce the risk of personal injury, do not
bend the blade brackets when installing the brackets,
balancing the blades, or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.
WARNING:
or personal injury, mount to an outlet box marked
"acceptable for fan support of 15.9 kg (35 lbs) or less"
and use screws provided with the outlet box.
WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician.
WARNING:
shock, do not use this fan with any solid-state speed
control device.
CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.
CAUTION:
Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
CAUTION:
of 7 ft. (2.1 m) of clearance from the trailing edge of the
blades to the floor.
2
To reduce the risk of fire, electric shock
To reduce the risk of fire or electric
The fan must be mounted with a minimum
Advertisement
