Plug & Play Feature - Samsung SP-43L2HX Owner's Instructions Manual

Plug & Play Feature
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
1
If the television is in Standby mode, press the POWER (
on the remote control.
Result: The message Plug & Play is displayed. It flickers for
a little while, and then the Language menu is
automatically displayed.
2 Select the appropriate language by pressing the † or ... button.
3
Press the ENTER (
Result: The message Antenna Input Check is displayed.
4
Make sure that the antenna is connected to the TV, and then
press the ENTER (
Result: The Country menu is displayed.
Select your country by pressing the † or ... button.
5
6
Press the ENTER (
Result: The Auto Store menu is displayed.
7
To start the search, select the Start and press the ENTER (
button.
Result: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
➢
To stop the search before it has finished or return to normal
viewing, press the EXIT (
8
When it has finished, the message Enjoy your watching is
displayed, and then the channel which has been stored will be
activated.
) button to confirm your choice.
) button.
) button to confirm your choice.
) or ENTER (
Press ENTER to start Plug & Play.
) button
)
) button.
Press ENTER to start channel store.
Plug & Play
Start Exit
Language
English
ъ
А
Hrvatski
Čeština
Nederlands
Français
Move Enter Exit
Plug & Play
Antenna Input Check
Start Exit
Country
Austria
Belgium
Croatia
Denmark
Finland
France
Germany
Move Enter Exit
Auto Store
Start Exit
Auto Store
Channel store in process.
Storing 175MHz
18%
Exit
Enjoy your watching
17
ENG