Table of Contents
Advertisement
Connecting an Amplifier/DVD Home Theater
Amplifier/DVD Home Theater
Audio Cable (Not supplied)
➢
Each external input source device has a different back panel configuration.
➢
When connecting an external device, match the color of the connection terminal to the cable.
Operation
Turning the TV On and Off
Plug & Play Feature
When the TV is initially powered on, basic customer settings proceed automatically and subsequently:
Menu language, Channels
and Time will be set .
Start
Plug & Play
Select the language of the OSD.
Language
English
Español
Français
Move
Enter
Plug & Play
Select the antennas to memorize.
Air
Cable
Air + Cable
Move
Enter
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
1. Press the POWER button on the remote control.
The message "Menu language, Channels and Time will be set." is displayed.
Press the ENTER button, then "Select the language of the OSD." menu is
automatically displayed.
2. Press the ENTER button to enter the language.
Press the ... or † button to select language, then press the ENTER button.
"Select the antennas to memorize." menu is automatically displayed.
Skip
3. Press the ... or † button to memorize the channels of the selected connection.
Press the ENTER button to select "Start".
➢
Start
Start
➢
Start
➢
Skip
TV Rear Panel
If the antenna is connected to ANT 1(AIR), select "Air" and if it is connected to ANT 2
(CABLE), select "Cable".
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable".
In Cable mode, you can select the correct signal source among "STD", "HRC", and
œ
"IRC" by pressing the
button, then press the
√
Press the
button to select "Start", then press the
Contact your local cable company to identify the type of cable system that exists in your
particular area.
English-13
1. Connect Audio Cables
between the AV OUT [L-
AUDIO-R] on the TV and
AUDIO IN on the
Amplifier/DVD Home
Theater.
When an audio amplifier
is connected to the
"AUDIO OUT [L-AUDIO-
R]" terminals: Decrease
the gain (volume) of the
TV, and adjust the
volume level with the
Amplifier's volume
control.
...
†
or
button.
ENTER
button.
Continued...
Advertisement
Table of Contents
