Plug & Play Feature (Depending On The Model) - Samsung CS-15K10MJ Owner's Instructions Manual

KS1A(TM75)ENG_asia(03121A)
ENG
Get user manuals: See SafeManuals.com
11/6/03
Plug & Play Feature
Plug & Play
Language
Engllish
Indonesia
Malaysia
Adjust Select
Ant. Input Check
Auto Store Exit
P 1
471 MHz 48 %
Exit
Time
Clock - - : - - am
Move Exit
ENJOY YOUR WATCHING
Function
Language : English
√
Time
√
Plug & Play
Blue Screen : Off
√
Child Lock
Select Enter Exit
10
11:28 AM Page 10
(depending on the model)
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER (
on the remote control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the Language menu is automatically
displayed.
Press the ▲ or ▼ button to select required language. Press the
2
MENU ( ) button to enter the language, and then the message
Ant. Input Check is displayed.
➣
If any language is not selected on the Language menu, the
Language menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to Storing the
Channels Automatically on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the Time menu is
displayed.
5
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to Setting
and Displaying the Current Time on page 24).
6
When you have finished, press the MENU (
Result: The message ENJOY YOUR WATCHING is displayed, and
then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1 Press the MENU (
Press the ▲ or ▼ button to select the Function, and then
2
press the œ or √ button.
Select the Plug & Play by pressing the ▲ or ▼ button, and
3
then press the œ or √ button.
Result: The message Plug & Play is displayed.
) button
) button.
) button.