Plug & Play Feature (Depending On The Model) - Samsung CW21M63N Owner's Instructions Manual

S56A_UI_ENG_EU
ENG
Get user manuals: See SafeManuals.com
8/30/03 10:47 AM Page 12
Plug & Play Feature
Plug & Play
Language
English Português
Deusch Italiano
Français Sverige
Nederland Türkçe
Español EÏÏËÓÈο
Adjust Select
Ant. Input : Check
Exit
P 1 - - - - -
471 MHz 48 %
Exit
Time
Clock 11 : 35
Move Exit
ENJOY YOUR WATCHING
Function
Language : English
√
Time
√
Plug & Play
Blue Screen : Off
√
Child Lock
√
Demonstration
Select Enter Exit
12
(depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode, press the POWER (
on the remote control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the "Language" menu is automatically
displayed.
Press the L or M button to select required language. Press the
2
MENU ( ) button to enter the language, and then the message
Ant. Input : Check is displayed.
➣
If any language is not selected on the Language menu, the
"Language" menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to "Storing the
Channels Automatically" on page 14).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the Time menu is
displayed.
5
Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the L or M button (refer to "Setting and
Displaying the Current Time" on page 31).
6
When you have finished, press the MENU (
Result: The message ENJOY YOUR WATCHING is displayed, and
then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1 Press the MENU ( ) button.
Press the L or M button to select the Function, and then
2
press the œ or √ button.
Select the Plug & Play by pressing the L or M button, and
3
then press the œ or √ button.
Result: The message Plug & Play is displayed.
) button
) button.