Control Panel Of Your Television - Samsung SP-43L2HX Owner's Instructions Manual

Control Panel of Your Television

( :On, :Blinking, :Off)
TIMER LAMP STAND BY/TEMP
➢
Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:
◆
Switch on the TV when it is in Standby mode and select channels ( ▲ C/P.
◆
Access the menu ( MENU ).
◆
Adjust the volume ( -
◆
Switch among Video input modes ( SOURCE ).
Indication
Standby mode.
A timer pilot lights when Timer Auto On or Off is selected.
Normal operation.
Normal operation (when Timer Auto On or Off is selected).
Lamp is warming up. The normal picture comes on after 25 seconds.
The normal picture comes on after 25 seconds. (when Timer Auto On or
Off is selected)
Air vent cover in the rear of the TV is not properly installed.
Inside temperature of the TV is over normal. Clean the air vent cover in the
rear of the TV. Turn the TV back on after 1 hour.
The lamp does not work, please contact an authorized Service Center for
assistance.
+ ).
(continued)
▼,
C/P. ).
9
ENG