Maytag MLG27PN Installation Instructions Manual page 24

ELECTRONIC CONTROL SETUP INSTRUCTIONS ELECTRONIC CONTROL SETUP INSTRUCTIONS
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two
or three right-hand characters.
NOTE: The first line of each code indicates the factory default.
Code Explanation
6 06 REGULAR CYCLE PRICE
Mode 6 allows you to set up how many quarters (coin 1) you
want customers to pay for cycle (i.e. if mode 6 set to 6 that
means it will take 6 quarters or $1.50 to start cycle).
6 06 Advance from 0–39 by pressing the
WHITES AND COLORS button. Factory default of
6 x coin 1.
6 00 PN/PR MODELS ONLY: Factory default of 6 00, or
0 coins.
• Press the PERM. PRESS button once to advance
to next code.
7 05 REGULAR DRY TIME
Mode 7 is the amount of time per cycle in minutes. It uses the
number of quarters from mode 6 and multiplies to number set
in mode 7 to give cycle time (i.e. if mode 6=6 and mode 7=5,
then the time per cycle is 6X5 or 30 minutes).
PD MODELS: Factory default of 5 minutes per coin.
7 05
By pressing the WHITES AND COLORS button,
value adjusts from 1 to the maximum minutes.
7 45 PN/PR MODELS: Represents the cycle length for free
cycles.
• Press the PERM. PRESS button once to advance
to next code.
8 00 TYPE OF DRYER PRICING
Mode 8 allows you to set up an additional time for user to keep
clothes in and continue cycle (i.e. if set to 00 then customer can
get an additional 5 min (factory default) cycle time for 1 quarter
inserted.) If mode 8 set to FC then no top off allowed.
8 00 Fixed Cycle with Top Off.
8 FC PN/PR MODELS ONLY: Fixed Cycle. Use the
DELICATES button to change this selection.
• Press the PERM. PRESS button once to advance
to next code.
MODE 9 allows you to keep track of how many cycles your
machine has done.
CYCLE COUNTER OPTION
9 00
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
9 00 Not Selected "OFF."
9 0C Selected "ON" and not able to be deselected.
• Press the DELICATES button 3 consecutive times
to select "ON." Once selected "ON," it cannot be
deselected.
• Press the PERM. PRESS button once to advance
to next code.
If cycle counter (9 0C) is selected, the following is true:
1 00 Cycles in HUNDREDS
2 00 Cycles in ONES
This is "VIEW ONLY" and cannot be cleared.
• Press the PERM. PRESS button once to advance
to next code.
24
1 02 = 200
2 25 = 25
TOTAL CYCLES = 225
Code Explanation
Mode 1.00 turns on how much money machine has collected if
you would like to keep track of that.
1. 00 MONEY COUNTER OPTION
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
1. 00 Not Selected "OFF."
1. 0C Selected "ON."
• Press the DELICATES button 3 consecutive
times to select "ON" and 3 consecutive times
to deselect (Not Selected "OFF"). Counter resets
by going from "OFF" to "ON."
1. C0 Selected "ON" and not able to be deselected.
• To select "ON" and not able to be deselected,
first select "ON"; then within 2 seconds, press
the DELICATES button twice, the WHITES AND
COLORS button once, and exit set-up mode.
• Press the PERM. PRESS button once to advance
to next code.
Mode 2.00 allows you to set special pricing for instance
different cost and/or different cycle times at specific times of
specific day).
2. 00 SPECIAL PRICING OPTIONS
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
2. 00 Not Selected "OFF."
2. SP Selected "ON."
• Press the DELICATES button once to change
this selection.
If SPECIAL PRICING OPTION is selected, there is access
to codes "3.XX" through "9.XX."
• Press the PERM. PRESS button once to advance
to next code.
If money counter (1.0C or 1.C0) is selected, the following
is true:
3 00 Currency amount
in HUNDREDS
4 00 Currency amount
in ONES
5 00 Currency amount
in HUNDREDTHS
3 01 = 100.00
4 68 = 68.00
5 75 = 00.75
TOTAL = 168.75