Table of Contents
Advertisement
2.5 Check oil level
Check the oil level only when the machine is not in operation and all vacuum
built up in the chamber has been vented. Be aware that the oil may be very hot
and avoid all contact.
Checking the Oil Level
* Check the oil level on a daily basis
* When checking the oil level use the sight gauge shown in figure 1 below. The level should be
between the arrows indicating Minimum and Maximum. If the level is below the minimum arrow add
oil until the maximum arrow is reached.
2.6 Power connection
When preparing to install the machine's main power connection please refer to the electrical
information on the serial number plate located on the machine's back panel. A certified
electrician should be employed to complete this connection.
Figure 1
6
Advertisement
Table of Contents
