Table of Contents
Advertisement
2.3 TC-280 Specifications
2.4 Environmental Requirements
The machine will start with difficultly if the air temperature is very low. The cause of this is
an increase in the vacuum pump's oil viscosity due to low temperature. To prevent this, please
set up machine according to the installation checklist described below:
1.Temperature
2.Working elevation
3.Relative humidity
During operating, heat is generated by the vacuum pump and vacuum process, so the machine
temperature keeping around 70 ~ 80℃ is normal. Also must have free air access for cooling.
A minimum distance from walls, other machines, etc. should be maintained, at least 20 cm for
each side of machine for providing adequate ventilation.
:
around 5 ~ 40℃
:
between 0 ~ 1000 meters
:
30 ~ 95% RH
5
Advertisement
Table of Contents
