Table of Contents
Advertisement
3.4 Operation of the Model PA-01 Analog Control Panel
On the model PA-01 analog control panel you will see four (4) dials from left to right they are
vacuum, gas, seal and cool (Refer to Fig. 3 below). When setting these dials to accomplish your
intended cycle please keep in mind that the reference numbers around each dial are only to
be used as a reference as they do not equate to seconds.
Proceed with setting these dials as indicated below. The settings indicated will be for a trial cycle and
various settings of each dial may be needed to achieve the results you require.
Set Each of the Dials as Follow.
1. Vacuum: Turn the dial to # 5
2. Gas: (optional feature) If your machine is equipped with the gas flush option and you wish to
gas flush the package you are currently working with turn this dial to # 2.
If your machine does not have the gas flush option or you do not wish to gas flush then turn the
dial to # 0.
3. Seal: Turn the dial no higher than # 3 for your first trial then increase or decrease as needed for
your pouch.
4. Cool: Turn to a minimum of # 3
8
Advertisement
Table of Contents
