Operation Of The Pd-01 Digital Control Panel - Promax TC-280 Operation Manual

3.5 Operation of the Optional PD-01 Digital Control
Using the touch up/down touch pads (Refer to Fig. 4 below) set the time for the vacuum, gas
, and seal and cool as indicated below. The times indicated in the digital display are in seconds.
Important note: the settings indicated below represent a starting point only and you will need to
perform adequate testing to determine the exact settings needed for your product.
1.Vacuum: Set a time of 15 seconds
2.Gas Flush (optional): If your machine is equipped with a gas flush system set a time of 5 seconds. If
your machine does not have a gas flush system or you will not use gas flush for the current application
then it is very important to set a time of 0.0 seconds.
3.Seal: Set a time of 1.5 seconds.
4.Cool: Set a time of 3.0 seconds.
9