Table of Contents
Advertisement
BOCK
®
13 | Declaration of incorporation
Declaration of incorporation for incomplete machinery
in accordance with EC Machinery Directive 2006/42/EC, Annex II 1. B
Manufacturer:
Bock GmbH
Benzstraße 7
72636 Frickenhausen, Germany
We, as manufacturer, declare in sole responsibility that the incomplete machinery
Name:
Semi-hermetic compressor
Types:
HG(X)12P/60-4 S (HC) ............... HG(X)88e/3235-4(S) (HC)
HGX12P/60 S 0,7 LG ................. HGX88e/3235 (ML/S) 95 LG
HG(X)22(P)(e)/125-4 A ............... HG(X)34(P)(e)/380-4 (S) A
HGX34(P)(e)/255-2 (A) .............. HGX34(P)(e)/380-2 (A)(K)
HA(X)12P/60-4 ........................... HA(X)6/1410-4
HAX22e/125 LT 2 LG ................. HAX44e/665 LT 14 LG
HGX12e/20-4 (ML/S) CO
HGX2/70-4 CO
HGZ(X)7/1620-4 ......................... HGZ(X)7/2110-4
Name:
Open type compressor
Types:
AM(X)2/58-4 ............................... AM(X)5/847-4
F(X)2 .......................................... F(X)88/3235 (NH3)
FK(X)1......................................... FK(X)3
FK(X)20/120 (K/N/TK)................. FK(X)50/980 (K/N/TK)
Serial number:
BC00000A001 – BH99999Z999
complies with the following provisions of the above-mentioned Directive:
According to Annex I, points 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.7, 1.5.1, 1.5.2, 1.5.13 and
1.7.1 to 1.7.4 (excepted 1.7.4 f) are fulfilled.
Applied harmonised standards, in particular:
EN ISO 12100 :2010
EN 12693
Remarks:
We also declare that the special technical documentation for this incomplete machine has been
created in accordance with Annex VII, Part B and we obligate to provide these upon reasoned
request from the individual national authorities by data transfer.
Commissioning is prohibited until it has been confirmed that the machinery into which the
incomplete machine above is to be incorporated complies with the EC Machinery Directive and
an EC Declaration of Conformity, Annex II. 1. A exists.
Authorized person for compiling and handing
over technical documentation:
Frickenhausen, 04th of January 2021
(LT) ... HGX44e/565-4 (ML/S) CO
2
T ....................... HGX46/440-4 (ML/S/SH) CO
2
Safety of machinery — General principles for design — Risk
assessment and risk reduction
:2008
Refrigerating systems and heat pumps — Safety and environmental
requirements — Positive displacement refrigerant compressors
Bock GmbH
Alexander Layh
Benzstraße 7
72636 Frickenhausen, Germany
i. A. Alexander Layh, Technical director
(LT)
2
T
2
D
GB
F
E
37
Advertisement
Table of Contents
