Comet WiFi CONTENTS These operating instructions will guide you through the commissioning and use of your Comet WiFi and answer all essential questions. Read these operating instructions carefully before using your Comet WiFi. Hand over all documents when passing it on to third parties.
Comet WiFi Safety Information SAFETY INFORMATION In addition to the safety information in these operating instructions, all other available sources must also be observed. The areas of use defined in the written explanations of the proper use must be observed.
Comet WiFi Safety Information WARNINGS When operating your Comet WiFi and its components, hazards may occur that can be avoided by observ- ing the following warnings. CAUTION!: Serious risk of injury caused by exploding batteries! Improper handling of batteries can lead to an explosion.
Page 6
IMPORTANT! Material damage and malfunction possible! Your Comet WiFi can be used by children aged from 8 years and above and persons with re- duced physical, sensory or mental capabilities or lack of experience and knowledge if they have been supervised or instructed in the safe use of your Comet WiFi and understand the hazards involved.
Î tronic Technology GmbH. INFORMATION The following drawings are for the purpose of illustration and are not necessarily to scale. EUROtronic Technology GmbH reserves the right to change the design or dimensions without prior notice. RAV pin* RAVL 2× AA/LR6 batteries...
PROPER USE Your Comet WiFi is used to regulate a radiator valve. This makes it possible to regulate the room temper- ature time-controlled and via an app. Your Comet WiFi moves a radiator valve to control the flow of heat into the radiator.
Comet WiFi Model 1 Union nut Arrow button Decrease temperature Wireless symbol Temperature display Arrow button Increase temperature Reset button INFORMATION The first model series (Comet WiFi Model 1) has a recessed reset button that is operated with the reset key provided.
Putting Comet WiFi into Operation PUTTING COMET WIFI INTO OPERA- TION The following section describes the procedure using the Eurotronic Smart Living 2.0 app for the Android operating system (app version: 1.2). The procedure may differ for the iOS operating system. INFORMATION The following illustrations show the app at the time of publication of these operating instruc- tions.
Comet WiFi Putting Comet WiFi into Operation CREATING USER ACCOUNT You must create a user account to use the app: Create a user account. Enter your e-mail address and assign a password. Make sure your e-mail is valid. The validity of the e-mail address will not be checked.
Putting Comet WiFi into Operation ADDING NEW DEVICE Tap the + button to add a new device. Then follow the steps displayed in the setup wizard to set up your Comet WiFi for initial operation. You have successfully added your Comet WiFi. Î...
• Your WiFi must transmit in the 2.4 GHz frequency range. If your router only supports the 5 GHz fre- quency range, operation of your Comet WiFi is not possible. For more information, see the operating instructions for your router.
Comet WiFi Putting Comet WiFi into Operation INSERTING BATTERIES Open the battery compartment cover. Insert the batteries provided as shown. Pay attention to the correct polarity and do not use rechargeable batteries! Close the battery compartment cover. The battery compartment cover audibly clicks into place.
Comet WiFi Putting Comet WiFi into Operation TEACHING IN COMET WIFI PA appears on the display of your Comet WiFi and the wireless symbol flashes. Your Comet WiFi is ready to connect to your WiFi network. Tap the Next button.
Page 16
Î INFORMATION During setup, you are briefly connected to the WiFi network of your Comet WiFi and a message may be displayed informing you that you are not connected to the Internet. Confirm this message to stay connected to your Comet WiFi and continue with the setup.
Page 17
Comet WiFi Putting Comet WiFi into Operation Tap the Next button. Now install your Comet WiFi on your radiator (see Section 5.7 Installing on radiator on Page 18) and tap the Next button. INFORMATION If the setup is not completed, ensure the following points: •...
Putting Comet WiFi into Operation INSTALLING ON RADIATOR Install your Comet WiFi on the desired radiator when indicated by the app. The Comet WiFi can be installed on all known valve bodies (see adapter list at www.eurotronic.org/ser- vice/faq). CAUTION!: Burns caused by hot radiator valve! Touching can cause burns to the hand.
Page 19
To do this, open the battery compartment cover and remove the batteries. Replace the batteries after approx. 10 sec. and close the battery compartment cover. Your Comet WiFi restarts and is in the adaptation mode. Ad appears in the display.
The following overview contains information about the valves and the required adapters. The adapters for Danfoss RAV, Danfoss RA and Danfoss RAVL are included with your Comet WiFi. When using the Danfoss RAV adapter, the RAV pin must be inserted on the valve plunger.
Page 21
Comet WiFi Putting Comet WiFi into Operation INFORMATION Remove the connecting pieces of the plastic adapters completely (see illustration) before using one of the adapters included! For Danfoss RAV and Danfoss RA, use the screw and nut provided. CAUTION!: Danger of becoming trapped between the adapter halves! Carelessness when using adapters can lead to injuries.
After successful adaptation, your Comet WiFi switches to normal operation. Tap the Next button in the app. If a problem occurs with your Comet WiFi, a new adaptation is necessary. Carry out the following steps for this purpose: Open the battery compartment cover.
Putting Comet WiFi into Operation 5.10 NAMING AND ASSIGNING COMET WIFI After successful installation and adaptation, you can give your Comet WiFi a name in the app and assign your Comet WiFi to a room. Enter a designation for your Comet WiFi in the input field.
Page 24
Select a symbol and a name for the room. Tap the Next button. Tap the Save button. You have successfully named your Comet WiFi and assigned it to a room. Î Your Comet WiFi is now fully set up and ready to use.
Comet WiFi Removing Comet WiFi REMOVING COMET WIFI The prerequisite for removing your Comet WiFi is that your Comet WiFi is in the adaptation mode, see Section Comet WiFi Model 2 on Page 9. CAUTION!: Burns caused by hot radiator valve! Touching can cause burns to the hand.
Configuring App CONFIGURING APP After successful installation and initial start-up of your Comet WiFi, you can make further settings in the Eurotronic Smart Living 2.0 app. From the start screen (My Home) you have access to the menu bar and all the rooms that have been set Back button Current display (e.g.
Comet WiFi Configuring App SETTING TEMPERATURE IN A ROOM You can set the temperature for each room individually. After selecting a room, set the desired tempera- ture for the room or radiator. Tap on the desired room (e.g. bathroom). The current room temperature and the set temperature are displayed.
Page 28
Your Comet WiFi then switches to the set Adjust the temperature individually with heating program. the setting wheel in the Set Temperature area. The set temperature is transmitted to your Comet WiFi as soon as you are on the same WiFi.
In the menu of a room (see Section 7.1 Setting temperature in a room on Page 27.) you have access to all Comet WiFis assigned to the room. You have access to additional settings and information about the selected Comet WiFi: Mac address.
Comet WiFi Configuring App HEATING PROFILE In the Heating profile menu, you set heating blocks with heating times for different days. You can set the temperature individually for each heating time. Tap the Heating profile button. The overview of the heating profiles is displayed.
Page 31
Comet WiFi Configuring App Tap on one or more rooms for which the heating profiles is to apply. Tap the Next button. Enter a designation for the heating profiles in the input field. Tap the Next button.
Page 32
Comet WiFi Configuring App Select a symbol for the heating profile. Tap the Save button. You have successfully created the heating profile. Î Tap the heating profile to set the heating times:...
Page 33
Delete the selected heating time. Select the period of the current heating block. Save the settings. INFORMATION Note that the settings are only transferred to the corresponding Comet WiFi and are consequently activated by tapping the Save button.
Comet WiFi Configuring App HOLIDAY Set a holiday profile for a period of absence in the Holiday menu. You can set the temperature individually for each switching point. Tap the Holiday button. Tap the button to create a new holiday profile.
Page 35
Comet WiFi Configuring App Enter a designation for the holiday profile in the input field. Tap the Next button. Select a symbol for the holiday profile. Tap the Save button.
Page 36
Comet WiFi Configuring App Tap Holidays to set the heating times: You have created the heating profile for a period of absence. Î...
Page 37
Set the Date for the end of the period of Save the settings. absence. INFORMATION Note that the settings are only transferred to the corresponding Comet WiFi and are consequently activated by tapping the Save button.
Comet WiFi Configuring App CUSTOMER SERVICE The following section describes the Customer Service area in the Eurotronic Smart Living 2.0 app. Tap the Settings button on the My Home screen. Tap the Help button.
Page 39
Tap the FAQs button to open the "Frequently Asked Questions" website. Tap the Instructions and Operating Guide Download button to download the operating instructions for the Eurotronic Smart Living 2.0 app. This area displays the contact information (see Section 11.2 Support and contact on Page 46).
Eurotronic Smart Living 2.0 app, see Section 7.4 Holiday on Page 34. If you press a button on the Comet WiFi during an active holiday profile, Ho appears in the display. When a button is pressed again, the set temperature is shown on the display, thereby deactivating the holiday profile.
WiFi by 180°. Adjust the settings if necessary, see Section 7.2 Device settings on Page 29. KEY LOCK / KEY LOCK PLUS Activate the key lock in the Eurotronic Smart Living 2.0 app to lock your Comet WiFi for other people, see Section 7.2 Device settings on Page 29.
Page 42
Friday at 11:00. TRAINING MODE On older models of the Comet WiFi (Comet WiFi Model 1), press the lower reset button in the battery compartment once. The display shows PA Additional information see Section 5.3 Adding new device...
If problems occur, it may be helpful to reset your Comet WiFi to the factory settings. Open the battery compartment cover. Comet WiFi Model 1: Press the lower reset button in the battery compartment once. Use the reset key included in the scope of delivery.
Comet WiFi Troubleshooting TROUBLESHOOTING Problems can also occur with your Comet WiFi. The following information will help you eliminate errors. Problem Cause Remedy The app does not show • Your router does not operate in the • Check whether your WiFi operates in the 2.4 WiFi in the "My WiFi...
Cleaning and Storage 10 CLEANING AND STORAGE Switch off your Comet WiFi and remove the batteries if you will not be using your Comet WiFi for a longer period of time. Store your Comet WiFi in a dry, dust-free place.
Comet WiFi Appendix 11 APPENDIX The following section contains information on technical data, customer service and other legal informa- tion. 11.1 TECHNICAL DATA Designation Comet WiFi 4260012711998 Article number 700200 Supply voltage 2× AA/LR6 batteries Threaded connection M30 × 1.5 mm...
Dispose of the packaging according to type. Dispose of cardboard and carton at waste paper collection points and foil at recyclables collection points. The symbols on your Comet WiFi, the operating instructions or the packaging refer to these regulations. With recycling, material recovery or other forms of recovery of used devices/batteries, you make an important contribution to the protection of our environment.
Comet WiFi Appendix 11.4 PERSONAL DATA Delete all personal data from your user account of the Eurotronic Smart Living 2.0 app before dis- posing of your Comet WiFi. 11.5 SIMPLIFIED DECLARATION OF CONFORMITY EUROtronic Technology GmbH hereby declares that your Comet WiFi complies with all applicable Commu- nity provisions of the European Economic Area Directive 2014/53/EU.
Need help?
Do you have a question about the Comet WiFi and is the answer not in the manual?
Questions and answers