atd models ATD008 Instruction Manual page 5

15. Detach component P (x4) and glue them
to the chimney to hide the white corners.
17. Apply a bead of glue across the top of the
walls and place the roof on the building.
We recommend using ATD low-tac masking
i
tape to assist on this step whilst the glue
cures.
You have now completed the Textile Mill Boiler House. We hope you enjoyed and
successfully built the kit! To view our other card kits, more products and find your
We'd love to see photos of your finished models. Please send them to
enquiries@atdmodels.co.uk for a chance to be featured on our social media pages.
local stockist, visit www.atdmodels.co.uk
© Copyright ATD Models | All Rights Reserved
16. Detach component M and place it face down
on your work surface. Then locate the glazing
sheet, cut out the sky lights and glue them
to component M.
18. Remove pieces Q, R, S and T from the sheet,
and them glue together in ascending order,
ensuring that all the pieces are centre aligned.
This will create the capping stones.
Next, apply a bead of glue to the bottom of
the capping stones and sit them on top of the
chimney stack. You may need to aid the shape
in which the top of the chimney naturally sits
in as you position the capping stones.