GETTING STARTED
Initial Installation
Onyx target connector
(Figure
38) connections must be connected to target device. USB cable
type-C side
(Figure
6) must be connected to Onyx type-C connector
(Figure
39). USB-A side
must be connected to a PC. After all these connections is done, Onyx will be ready to use.
OPERATING BASICS
Obtaining and Installing the Onyx Controller
A setup file will be provided along with the Onyx I²C/SPI Adapter to install the Onyx Controller
application. Following steps shows the installation process by using the setup file.
Selecting Additional Tasks
At first step, user is prompted to select additional tasks. These tasks are creating a desktop
shortcut and installing D2XX drivers. If user wants to create a desktop shortcut, this option
must be selected. Other option is used to install the D2XX drivers. If the drivers are not already
installed, user can install drivers by selecting this option.
Figure 9: Setup - Selecting additional tasks
DE4001_USER MANUAL
Rev. No:0 Rev. Date: 05.08.2023
www.deico.com.tr
7 / 31